UsGlobalSat BC-337 User Manual

BC-337 User Manual version 1.1 page 1 of 15 BC-337 GPS Receiver with Compact Flash Interface User Manual

BC-337 User Manual version 1.1 page 10 of 15 4. Click “Next” button. The driver will copy the necessary files into system. 5. Click “Finish” butt

BC-337 User Manual version 1.1 page 11 of 15 Setup for Windows XP 1. The system will recognize the device. It will show the “Found New Hardware W

BC-337 User Manual version 1.1 page 12 of 15 4.3. Test the BC-337 GPS receiver for Notebook PC 1. From desktop, double click the “Gpsinfo” icon

BC-337 User Manual version 1.1 page 13 of 15 6. If BC-337 can not receive the GPS data, please check if you select the correct COM Port. You can

BC-337 User Manual version 1.1 page 14 of 15 A tip to check the COM port of BC-337 1. From desktop, right click on “My Computer” icon and click

BC-337 User Manual version 1.1 page 15 of 15 FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following

BC-337 User Manual version 1.1 page 2 of 15 1. BC-337 at a glance External AntennaConnector Internal AntennaLE

BC-337 User Manual version 1.1 page 3 of 15 2. Introduction The BC-337 is a GPS receiver with Compact Flash type I interface and it has a built-in

BC-337 User Manual version 1.1 page 4 of 15 3. Specification Electrical Characteristics (Receiver) Frequency: L1, 1575.42MHz Channel: 20 channe

BC-337 User Manual version 1.1 page 5 of 15 4. Installation The BC-337 GPS receiver supports plug and play. For PDA For Notebook PC 1. Plug BC-3

BC-337 User Manual version 1.1 page 6 of 15 4.1. Test the BC-337 GPS receiver for PDA Note: Before you do the following test, please refer to GPS

BC-337 User Manual version 1.1 page 7 of 15 Date and Time information Speed and Direction 2D or 3D Horizontal Dilution of Precision

BC-337 User Manual version 1.1 page 8 of 15 Setup for Windows 98, ME 1. The system will recognize the device. It will show the “Add New Hardware

BC-337 User Manual version 1.1 page 9 of 15 Setup for Windows 2000 1. The system will recognize the device. It will show the “Found New Hardware